跳至主要内容

IPX34 oscillating tube waterproof test machine





IPX3-4 Oscillating Tube
Introduction:
IPX3-4 is designed according to IEC60529 clause 14.2.3 and 14.2.4. It is applied to simulate the electronics, luminaire, electric components and auto parts under the conditions of spraying water and splashing water, and then to check if they can meet the requirements.

Features:
● For IPX3 and IPX4 testing
● The shell of the equipment and turntable are made by SUS304# stainless steel, to ensure rustless.
● Adopts double pillars structure, easy to install and stable rotation.
● Equip with adjustable trundles, makes the equipment easy to move.
● The tank is under the equipment, auto to control the water level with the help of Water floating ball valve , and alarm at high or low level to protect from the damage caused by low water level.
● Oscillating tube drive: Adopts Panasonic serve motor, with features of low noise and high accuracy.
● Turntable drive: adopts Chinese branded step motor, can adjust the speed and angle by touch screen, and auto control the directions (fit for the samples to do live test).
● Time setting for power: power off: 0-999min-power on: 0-999min-power off: 0-999min
● Control components: 7 inch touch screen+ Panasonic PLC.

Specification:
Model
IPX34C
Tube Radius
R1600
R1400
R1200
R1000
R800
R600
R400
R200
Outer size (L*W*H, m)
4*3.2*2.8
3.6*3*2.6
3.2*2.4*2.4
2.8*2.2*2.2
2.4*1.8*2
2*1.4*1.8
/
/
Delivery rate (L/min)
0~10
0~10
0~6
0~6
0~4
0~3
/
/
Diameter of turntable (mm)
Φ1000
Φ1000
Φ800
Φ800
Φ600
Φ600
/
/
Height of turntable (mm)
1750~2350
1750~2350
1350~1950
1350~1950
950~1550
550~1000
/
/
Aperture of nozzles (mm)
0.4
Tube angle
1200 (IPX3), 3600 (IPX4) or user-defined
Rotation speed of tube
4s for 2*1200, 12s for 2*3600 or user defined
Material of tube
SUS304 stainless steel
Rotation speed of turntable
1~5r/min
Protection
Electric leakage, hydropenia, short circuit
Working power
220V, 50/60Hz, 1KW

标签：

评论

发表评论

此博客中的热门博文

The material of standardized cookware in EN60350-2 version 2018 and version 2013

The standardized cookwares referred in this article are designed according to EN(IEC)60350-2 table (Z)3. The diameter of the cookware bottom (outside), diameter of the lid, lid hole circle diameter, number of holes on the circle, total cookware height (outside) and flatness of cookware bottom are specified in table (Z)3. The materials of side wall, cookware bottom and lid are different. In version 2018, the side wall of cookware is made of stainless steel AISI type 304, the cookware bottom is made of stainless steel AISI type 430, and and the lid is made of aluminium. In version 2013, the side wall of cookware is made of 1.4301 stainless steel, the cookware bottom is made of stainless steel 1.4016, and the lid is made of aluminium. Items Version 2018 Version 2013 Remark material thickness material thickness Side wall   stainless steel AISI  304 1mm±0.05mm 1.4301 stainless steel 1mm±0.05mm C ylindrical without handles or protrusions. Cookware bottom stainless steel AISI  ...
发表评论
阅读全文

vertical impact hammers

The vertical impact hammer is designed according to IEC60068-2-75 test Ehc, the hammer consists by a striking element which falls freely from rest through a vertical height on to the specimen surface held in a horizontal plane, and the fall of the striking element shall be along a guideway, the guideway shall not rest on the specimen and the striking element shall be free of the guideway on the striking the specimen , the mass of striking element is equal to equivalent mass . 2J striking element equip with Φ 40 mm*4 71 mm guideway, 5J striking element equip with Φ6 8 mm*3 85 mm guideway, 10J striking element equip with Φ8 9 mm* 337 mm guideway, 20J striking element equip with Φ10 8 mm* 520 mm guideway, 50J striking element equip with  Φ12 9 mm* 650 mm guideway. 
发表评论
阅读全文

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5   1.  Introduction: The high current arc ignition tes t apparatus is designed according to  IEC60950-1:2001  clause 4.7.3.6 , BS/EN60950-1:2001, BS7002:2001, GB4943-2001 and UL746A, IEC60947.1:1999, GB/T14048.1-2000, IEC730.1:1993, GB14536.1-1998 and etc..  It ’ s used to measure and assess  solid insulating material against to resistance to ignition from arcing electrical sources. A power 240V(AC)/60Hz is to be supplied to the test electrodes  (fixed electrode and movable electrode) , a series (inductive-resistive) air core impedance is to be provided to yield a short circuit current of 32.5A and a power factor of 0. 5. The sample is be to positioned with the electrodes making initial contact on the surface of the sample, the circuit is to be energized and the cyclic arcing started. The timing of arcs is to be adjusted to a rate of 40 arcs/min, the rate of electrode separation is to be 254±...
发表评论
阅读全文