跳至主要内容

Melt-Blown Fabrics Particulate Filtration Efficiency Test Equipment Face Mask Test Machine

1. Introduction
Particulate filtration efficiency test equipment is used for testing the filtration efficiency of particulate matter in daily protective masks, self-priming filter respirator for respiratory protection products, and to determine the obstruction performance of ordinary fabrics and  melt-blown fabrics for constant airflow, it is designed according to GB32610-2016 “Technical Specification of Daily Protective Mask” and GB2626-2019 “Respiratory Protective Equipment-Non Powered Air Purifying Particle Respirator”, the equipment is used in medical device inspection center, safety protection inspection center, labor protection inspection center, drug inspection center, disease prevention and control center, textile testing center, hospitals, masks and melt-blown fabric manufacturers.

2. Features
● Control system: The computer controls the test process, automatically collects data, and configures a dedicated computer and test software.
● Control mode: Touch screen computer control, also can be operated by USB connection with mouse
● After the test is completed, a PDF test report can be automatically generated, and test data can be exported without worrying about data loss. The computer automatically tests the gas concentration, automatically calculates the filter efficiency; can save, output, query, copy and export the test data.
● The operation is simple: the user only needs to place the object to be measured in the fixture and press the button to adjust the test flow. The system will automatically test the filter efficiency through the controller (PLC). The whole process is simple, fast and efficient.
● The aerosol generator is used to produce continuous and stable aerosol particles, which is convenient for filling solution
● Using a high-precision particle concentration counter to measure the number of aerosol particles
● The whole particle anti-leakage design protects the safety of laboratory personnel
● The equipment comes standard with an aerosol generator (1 set): salt particulate aerosol generator (Customers can additionally choose 1 set of oily particulate aerosol generation)
● Equipped with aerosol particulate static neutralization device.
● Equipped with temperature and humidity sensor, real-time display of ambient temperature and humidity (temperature and humidity requirements: 25 ℃ ± 5 ℃, 30% RH ± 10% RH).
● Equipped with glass rotor flowmeter, vacuum pump, gas electromagnetic flowmeter.

3. Specification
Filter efficiency detection flowmeter range
10~100L/min, accuracy: class 2.5
Filter efficiency detection range
0.001~99.999%
Filter efficiency sampling frequency
1~9999 times/min
Filter efficiency particulate concentration
0.001~200mg/m3
Differential pressure sensor range
0~1000Pa
Count median diameter
0.075±0.02μm (Salt particles)
0.185±0.02μm (Oil particles)
Geometric standard deviation of particle size distribution
≦1.86 (salt particles)
≦1.60 (oil particles)
Dynamic detection range
0.001~100mg/m3, accuracy: 1%
Test area
100cm2
Aerosol
Sodium chloride (DOP, DEHS, Paraffin oil and corn oil for optional)
Detection flow range
32L/min and 85L/min
Working power
AC220V/50Hz
Language
English-Chinese Switchable

4. Standard requirement
Detection of KN-type filter elements with sodium chloride (NaCl) particles, and detection of KP-type filter elements with DOP (dioctyl phthalate) or oil particles with suitable properties (such as paraffin oil), during the testing process, the filter efficiency of each sample should always meet the requirements of the following table (GB2626-2006 table 2):
Filter elements
Detection with sodium chloride
Detection with oil particles
KN90
≧90.0%
Not applicable
KN95
≧95.0%
KN100
≧99.97%
KP90
Not applicable
≧90.0%
KP95
≧95.0%
KP100
≧99.97%

5. Picture

评论

发表评论

此博客中的热门博文

The material of standardized cookware in EN60350-2 version 2018 and version 2013

The standardized cookwares referred in this article are designed according to EN(IEC)60350-2 table (Z)3. The diameter of the cookware bottom (outside), diameter of the lid, lid hole circle diameter, number of holes on the circle, total cookware height (outside) and flatness of cookware bottom are specified in table (Z)3. The materials of side wall, cookware bottom and lid are different. In version 2018, the side wall of cookware is made of stainless steel AISI type 304, the cookware bottom is made of stainless steel AISI type 430, and and the lid is made of aluminium. In version 2013, the side wall of cookware is made of 1.4301 stainless steel, the cookware bottom is made of stainless steel 1.4016, and the lid is made of aluminium. Items Version 2018 Version 2013 Remark material thickness material thickness Side wall   stainless steel AISI  304 1mm±0.05mm 1.4301 stainless steel 1mm±0.05mm C ylindrical without handles or protrusions. Cookware bottom stainless steel AISI  ...
发表评论
阅读全文

vertical impact hammers

The vertical impact hammer is designed according to IEC60068-2-75 test Ehc, the hammer consists by a striking element which falls freely from rest through a vertical height on to the specimen surface held in a horizontal plane, and the fall of the striking element shall be along a guideway, the guideway shall not rest on the specimen and the striking element shall be free of the guideway on the striking the specimen , the mass of striking element is equal to equivalent mass . 2J striking element equip with Φ 40 mm*4 71 mm guideway, 5J striking element equip with Φ6 8 mm*3 85 mm guideway, 10J striking element equip with Φ8 9 mm* 337 mm guideway, 20J striking element equip with Φ10 8 mm* 520 mm guideway, 50J striking element equip with  Φ12 9 mm* 650 mm guideway. 
发表评论
阅读全文

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5   1.  Introduction: The high current arc ignition tes t apparatus is designed according to  IEC60950-1:2001  clause 4.7.3.6 , BS/EN60950-1:2001, BS7002:2001, GB4943-2001 and UL746A, IEC60947.1:1999, GB/T14048.1-2000, IEC730.1:1993, GB14536.1-1998 and etc..  It ’ s used to measure and assess  solid insulating material against to resistance to ignition from arcing electrical sources. A power 240V(AC)/60Hz is to be supplied to the test electrodes  (fixed electrode and movable electrode) , a series (inductive-resistive) air core impedance is to be provided to yield a short circuit current of 32.5A and a power factor of 0. 5. The sample is be to positioned with the electrodes making initial contact on the surface of the sample, the circuit is to be energized and the cyclic arcing started. The timing of arcs is to be adjusted to a rate of 40 arcs/min, the rate of electrode separation is to be 254±...
发表评论
阅读全文