跳至主要内容

IPX69K test chamber operation guidence


2. Features

1). For IPX5, IPX6, IPX6K and IPX9K testing

2). The outer shell is made of high-quality steel plate, coating with stoving varnish.

3).The chamber inner and turntable are made by SUS304# stainless steel ensure that it will not rust after long-term use.

4). Box structure design. comes with a water tank, the water can be recycled. The water storage tank is equipped with a water level float valve, which automatically controls the water intake, and has a low water level alarm detection, which effectively prevents the water pump from drying out and becoming damaged.

5). Integral structure, the IPX5/6/6K jet nozzles are fixed on test tunnel, and can automatically swing up and down,operator just to fix the sample and start the test.

6). With a transparent observation window made by tempered glass, an LED light is installed in the box to facilitate observation during the test.

7). Support live test. Built-in outlet in the chamber (AC220V, 10A) for live test. The power on and power off time can be controlled: off (0~999min)-on (0~999min)-off (o-999min), fit for power on and off test.

8). 4 fan jet nozzles are distributed in the right side of the box at 900. The nozzles and water jet impact force calibrator are strictly designed according to the standard requirement. The force sensor of impact force calibrator is imported from Germany with high precision. 

The spray water flow, pressure and temperature can be set on the touch screen.

10). Adopts high quality stepping motor, the speed and angle of turntable can be set by touch screen.

11). Adopts high-quality water pump, resistant to high temperature and high pressure, can be used for a long time, and has stable performance.

12). Test time: 0-999min adjustment, can be set by touch screen, and will auto stop when time up.

13). The core control system adopts 7inch touch screen + Panasonic PLC, and adopts world-branded electrical components, such as LG, Omron and etc.. The wiring process meets the requirements of national standards, the electrical board layout is reasonable, the wiring is firm, and the marking is clear.

14). IPD temperature control, set the temperature by touch screen.

15). Communication function optional, can work with PC to save the data.

16). With leakage protection, water shortage protection, overflow protection and short circuit protection to protect the equipment from damage . Door induction protection to protect the operator from hurt. 

评论

此博客中的热门博文

The material of standardized cookware in EN60350-2 version 2018 and version 2013

The standardized cookwares referred in this article are designed according to EN(IEC)60350-2 table (Z)3. The diameter of the cookware bottom (outside), diameter of the lid, lid hole circle diameter, number of holes on the circle, total cookware height (outside) and flatness of cookware bottom are specified in table (Z)3. The materials of side wall, cookware bottom and lid are different. In version 2018, the side wall of cookware is made of stainless steel AISI type 304, the cookware bottom is made of stainless steel AISI type 430, and and the lid is made of aluminium. In version 2013, the side wall of cookware is made of 1.4301 stainless steel, the cookware bottom is made of stainless steel 1.4016, and the lid is made of aluminium. Items Version 2018 Version 2013 Remark material thickness material thickness Side wall   stainless steel AISI  304 1mm±0.05mm 1.4301 stainless steel 1mm±0.05mm C ylindrical without handles or protrusions. Cookware bottom stainless steel AISI  ...

vertical impact hammers

The vertical impact hammer is designed according to IEC60068-2-75 test Ehc, the hammer consists by a striking element which falls freely from rest through a vertical height on to the specimen surface held in a horizontal plane, and the fall of the striking element shall be along a guideway, the guideway shall not rest on the specimen and the striking element shall be free of the guideway on the striking the specimen , the mass of striking element is equal to equivalent mass . 2J striking element equip with Φ 40 mm*4 71 mm guideway, 5J striking element equip with Φ6 8 mm*3 85 mm guideway, 10J striking element equip with Φ8 9 mm* 337 mm guideway, 20J striking element equip with Φ10 8 mm* 520 mm guideway, 50J striking element equip with  Φ12 9 mm* 650 mm guideway. 

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5   1.  Introduction: The high current arc ignition tes t apparatus is designed according to  IEC60950-1:2001  clause 4.7.3.6 , BS/EN60950-1:2001, BS7002:2001, GB4943-2001 and UL746A, IEC60947.1:1999, GB/T14048.1-2000, IEC730.1:1993, GB14536.1-1998 and etc..  It ’ s used to measure and assess  solid insulating material against to resistance to ignition from arcing electrical sources. A power 240V(AC)/60Hz is to be supplied to the test electrodes  (fixed electrode and movable electrode) , a series (inductive-resistive) air core impedance is to be provided to yield a short circuit current of 32.5A and a power factor of 0. 5. The sample is be to positioned with the electrodes making initial contact on the surface of the sample, the circuit is to be energized and the cyclic arcing started. The timing of arcs is to be adjusted to a rate of 40 arcs/min, the rate of electrode separation is to be 254±...