跳至主要内容

Thermocouple

Thermocouple is a commonly used temperature measuring component in temperature measuring instruments. It directly measures the temperature and converts the temperature signal into a thermoelectric potential signal, which is converted into the temperature of the measured medium by an electric meter (secondary meter). The shape of various thermocouples is often very different due to needs, but their basic structure is roughly the same, usually composed of hot electrode, insulating sleeve, protection tube, junction box and etc., and often equip with display instrument, recording instrument and electronic regulator, like multiplex temperature meter, black test corner and etc.

According to the seeback effect, when two different metals are connected together, there is a contact voltage between the two contact points, which depends on the temperature. The connection of thermocouple materials is standard, and the different properties of the thermocouple materials determine their different applications.

Type
Material
Temperature range
+
-
T
Cu
CuNi
-270℃-400℃
K
NiCr
NiSi
-270℃~1372℃
B
PtRh (30)
tRh
270℃~1820℃
N
NiCrSi
NiSi
-270℃~1300℃
E
NiCr
CuNi
-270℃~1300℃
R
PtRh (10)
Pt
-50℃~1769℃
S
PtRh (13)
Pt
50℃~1769℃
J
Fe
NiCu
-210℃~1200℃

The technical advantages of thermocouple: 1). thermocouple temperature measurement range is wide, performance is stable; 2). measurement accuracy is high, thermocouple is in direct contact with the object to be tested, and is not affected by intermediate medium; 3). thermal response time is fast, and thermocouple has flexible response to temperature change; 4). The measuring range is large, and the thermocouple can be continuously measured from -40 to + 1600 °C; 5). the thermocouple has reliable performance and good mechanical strength. 6). The service life is long and the device is convenient.

评论

发表评论

此博客中的热门博文

JIS D0203 rain nozzle and spray nozzle test chamber

https://www.pegotester.com/JISD0203_rain_and_spray_test_chamber.html The spray nozzle and rain nozzle test chamber is designed to meet the test requirements of JISD0203 R1/R2 rain test and S1/S2 spray test. The rain nozzle has 2 holes and spray nozzle has 40 holes. Type Symbol Test Purpose Test Method Rain Test R1 Auto parts against water direct contact water pressure: 0.01Mpa, water flow: 1.9L/min, water temperature: ordinary temperature, test time: 10min R2 Auto parts against rain or spray water   indirect contact water pressure: 0.03Mpa, water flow: 3.2L/min, water temperature: ordinary temperature, test time: 10min Spray Test S1 Auto parts against rain or jet water direct contact water pressure: 0.10Mpa, water flow: 24.5L/min, water temperature: ordinary temperature, test time: 30min S2 Auto parts against riptide water pressure: 0.30Mpa, water flow: 39.2L/min, water temperature: ordinary temperature, test time: 1h  
发表评论
阅读全文

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5   1.  Introduction: The high current arc ignition tes t apparatus is designed according to  IEC60950-1:2001  clause 4.7.3.6 , BS/EN60950-1:2001, BS7002:2001, GB4943-2001 and UL746A, IEC60947.1:1999, GB/T14048.1-2000, IEC730.1:1993, GB14536.1-1998 and etc..  It ’ s used to measure and assess  solid insulating material against to resistance to ignition from arcing electrical sources. A power 240V(AC)/60Hz is to be supplied to the test electrodes  (fixed electrode and movable electrode) , a series (inductive-resistive) air core impedance is to be provided to yield a short circuit current of 32.5A and a power factor of 0. 5. The sample is be to positioned with the electrodes making initial contact on the surface of the sample, the circuit is to be energized and the cyclic arcing started. The timing of arcs is to be adjusted to a rate of 40 arcs/min, the rate of electrode separation is to be 254±...
发表评论
阅读全文

what equipment can be used for IPX3 and IPX4 water ingress protection test?

1. Spray nozzle 1.  Introduction The spray nozzle hand-held device is designed according to IEC60529 figure 5, it is it is apply to verify the protection against spraying water (IPX3) and splashing water (IPX4) for large size sample. The hand-held device is consisted by spray nozzle, moving shield, counterweight, hose and pressure gauge. The spray nozzle is made of brass and has 121 holes with diameter 0.5mm (1 hole at center, 1 inner circles of 12 holes at 30 0  pitch, 4 outer circles of 24 holes at 15 0 pitch). The moving shield is made of aluminum, the counterbalanced shield is in place for IPX3 test, the water pressure is adjusted to give the specified delivery rate, the pressure to achieve this delivery rate will be in the range of 50kPa to 150kPa, and it should be kept constant during the test, the test duration is 1min/m 2  of the calculated surface of the enclosure and with a minimum duration of 5 min. For IPX4 test, the counterbalanced shield is removed fro...
发表评论
阅读全文