跳至主要内容

How to choose the IK code test apparatus?

IK coding system is to indicate the degrees of protection provided by enclosures for electrical equipment against harmful external mechanical impact, which is given by IEC62262. The code is consisted by codes letters (IK) and characteristic group numbers (00 to 10), and each characteristic group number standards for an impact value, the values as below:

IK code
IK00
IK01
IK02
IK03
IK04
IK05
IK06
IK07
IK08
IK09
IK10
Impact energy(J)
*
0.14
0.2
0.35
0.5
0.7
1
2
5
10
20

In order to give a common standard to electrotechnical equipment, IEC60068-2-75 environmental testing regarding hammer tests mentions three kinds of tool, pendulum hammer, spring hammer, and vertical hammer. To obtain repeatable and reproducible results, the test is more depends on the details of apparatus.

The choice of the test apparatus depends on the orientation of the surface to be tested and on the energy level. Not all methods can be used in every case. It is self-evident that a pendulum hammer can only be used on vertical surfaces without overhangings. Similarly the vertical hammer can normally only be used on accessible horizontal surfaces. When the specimen cannot be moved or turned, for any reason, the choice is limited. The advantage of the spring hammer is that it can be used in any position, provided there is enough room to apply it correctly, and that the specified impact energy does not exceed 2J. For higher energy levels, a spring hammer would be too difficult to handle, and could even be hazardous for the operator.

Hammer test is widely applied to electric appliance, lamp and etc. For example, according to IEC60598-1-2008 clause 4.13.1, all the LED lamps requires do the hammer impact test.

Pego tester is professional on spring hammer and pendulum hammer which meet the requirements of IEC60068-2-75 regarding Eha, Ehb and Ehc, welcome to contact for more information.  

IK01 to IK06 (0.14J to 1J) Universal Spring Hammer:
http://www.pegotester.com/IK02_to_IK06_universal_spring_hammer.html#_jcp=3_2

IK07 2J Spring hammer:
http://www.pegotester.com/IK07_2J_spring_hammer.html#_jcp=3_2

IK07 to IK10 (2J to 20J） Pendulum Impact Hammer:
http://www.pegotester.com/IK07_to_IK10_pendulum_impact_hammer.html#_jcp=3_2

IK07 to IK10 (2J to 20J) Vertical Impact Hammer: 
http://www.pegotester.com/IK07_to_IK10_vertical_impact_hammers.html#_jcp=3_2
标签：

评论

发表评论

此博客中的热门博文

JIS D0203 rain nozzle and spray nozzle test chamber

https://www.pegotester.com/JISD0203_rain_and_spray_test_chamber.html The spray nozzle and rain nozzle test chamber is designed to meet the test requirements of JISD0203 R1/R2 rain test and S1/S2 spray test. The rain nozzle has 2 holes and spray nozzle has 40 holes. Type Symbol Test Purpose Test Method Rain Test R1 Auto parts against water direct contact water pressure: 0.01Mpa, water flow: 1.9L/min, water temperature: ordinary temperature, test time: 10min R2 Auto parts against rain or spray water   indirect contact water pressure: 0.03Mpa, water flow: 3.2L/min, water temperature: ordinary temperature, test time: 10min Spray Test S1 Auto parts against rain or jet water direct contact water pressure: 0.10Mpa, water flow: 24.5L/min, water temperature: ordinary temperature, test time: 30min S2 Auto parts against riptide water pressure: 0.30Mpa, water flow: 39.2L/min, water temperature: ordinary temperature, test time: 1h  
发表评论
阅读全文

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5   1.  Introduction: The high current arc ignition tes t apparatus is designed according to  IEC60950-1:2001  clause 4.7.3.6 , BS/EN60950-1:2001, BS7002:2001, GB4943-2001 and UL746A, IEC60947.1:1999, GB/T14048.1-2000, IEC730.1:1993, GB14536.1-1998 and etc..  It ’ s used to measure and assess  solid insulating material against to resistance to ignition from arcing electrical sources. A power 240V(AC)/60Hz is to be supplied to the test electrodes  (fixed electrode and movable electrode) , a series (inductive-resistive) air core impedance is to be provided to yield a short circuit current of 32.5A and a power factor of 0. 5. The sample is be to positioned with the electrodes making initial contact on the surface of the sample, the circuit is to be energized and the cyclic arcing started. The timing of arcs is to be adjusted to a rate of 40 arcs/min, the rate of electrode separation is to be 254±...
发表评论
阅读全文

The material of standardized cookware in EN60350-2 version 2018 and version 2013

The standardized cookwares referred in this article are designed according to EN(IEC)60350-2 table (Z)3. The diameter of the cookware bottom (outside), diameter of the lid, lid hole circle diameter, number of holes on the circle, total cookware height (outside) and flatness of cookware bottom are specified in table (Z)3. The materials of side wall, cookware bottom and lid are different. In version 2018, the side wall of cookware is made of stainless steel AISI type 304, the cookware bottom is made of stainless steel AISI type 430, and and the lid is made of aluminium. In version 2013, the side wall of cookware is made of 1.4301 stainless steel, the cookware bottom is made of stainless steel 1.4016, and the lid is made of aluminium. Items Version 2018 Version 2013 Remark material thickness material thickness Side wall   stainless steel AISI  304 1mm±0.05mm 1.4301 stainless steel 1mm±0.05mm C ylindrical without handles or protrusions. Cookware bottom stainless steel AISI  ...
发表评论
阅读全文