跳至主要内容

JIS D0203 R1/R2/S1/S2 Rain and Spray Test Chamber for Auto Parts

 JIS D0203 R1/R2/S1/S2 Rain and Spray Test Chamber for Auto Parts

Introduction

The waterproof test chamber is designed to meet the test requirements of JIS D0203 for R1/R2/S1/S2 tests and IEC60529 for IPX3/IPX4/4K tests. The rotating tube with 2 rain nozzles for R1/ R2 rain tests, the rotating tube with 40 spray nozzles for S1/S2 spray tests, both are strictly designed according to JISD0203. The oscillating tube for IPX3/4 testing is strictly designed according to IEC60529, the tube radius is R400 which has 25 nozzles and 0.4 diameter. This equipment puts the coil and the swing tube in a test chamber, R1, R2, S1, S2 tests can be carried out separately or simultaneously, and IPX3, IPX4, IPX4K tests can be carried out separately. A waterproof socket-outlet for specimen is attached on the wall of the test chamber to support live test, the front panel is transparent for easy observation of the experimental process.

Type

Symbol

Test Purpose

Test Method

Rain Test

R1

Auto parts against water direct contact

water pressure: 0.01Mpa, water flow: 1.9L/min, water temperature: ordinary temperature, test time: 10min

R2

Auto parts against rain or spray water indirect contact

water pressure: 0.03Mpa, water flow: 3.2L/min, water temperature: ordinary temperature, test time: 10min

Spray Test

S1

Auto parts against rain or jet water direct contact

water pressure: 0.10Mpa, water flow: 24.5L/min, water temperature: ordinary temperature, test time: 30min

S2

Auto parts against riptide

water pressure: 0.30Mpa, water flow: 39.2L/min, water temperature: ordinary temperature, test time: 1h

Spray Test

IPX3

Enclosure against spraying water

spray±60 degrees from vertical, water flow: 0.07L/min±5% per hole, test time: 10min

IPX4

Enclosure against splashing water

spray±180 degrees from vertical, water flow: 0.07L/min±5% per hole, test time: 10min

  


标签：

评论

发表评论

此博客中的热门博文

JIS D0203 rain nozzle and spray nozzle test chamber

https://www.pegotester.com/JISD0203_rain_and_spray_test_chamber.html The spray nozzle and rain nozzle test chamber is designed to meet the test requirements of JISD0203 R1/R2 rain test and S1/S2 spray test. The rain nozzle has 2 holes and spray nozzle has 40 holes. Type Symbol Test Purpose Test Method Rain Test R1 Auto parts against water direct contact water pressure: 0.01Mpa, water flow: 1.9L/min, water temperature: ordinary temperature, test time: 10min R2 Auto parts against rain or spray water   indirect contact water pressure: 0.03Mpa, water flow: 3.2L/min, water temperature: ordinary temperature, test time: 10min Spray Test S1 Auto parts against rain or jet water direct contact water pressure: 0.10Mpa, water flow: 24.5L/min, water temperature: ordinary temperature, test time: 30min S2 Auto parts against riptide water pressure: 0.30Mpa, water flow: 39.2L/min, water temperature: ordinary temperature, test time: 1h  
发表评论
阅读全文

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5   1.  Introduction: The high current arc ignition tes t apparatus is designed according to  IEC60950-1:2001  clause 4.7.3.6 , BS/EN60950-1:2001, BS7002:2001, GB4943-2001 and UL746A, IEC60947.1:1999, GB/T14048.1-2000, IEC730.1:1993, GB14536.1-1998 and etc..  It ’ s used to measure and assess  solid insulating material against to resistance to ignition from arcing electrical sources. A power 240V(AC)/60Hz is to be supplied to the test electrodes  (fixed electrode and movable electrode) , a series (inductive-resistive) air core impedance is to be provided to yield a short circuit current of 32.5A and a power factor of 0. 5. The sample is be to positioned with the electrodes making initial contact on the surface of the sample, the circuit is to be energized and the cyclic arcing started. The timing of arcs is to be adjusted to a rate of 40 arcs/min, the rate of electrode separation is to be 254±...
发表评论
阅读全文

what equipment can be used for IPX3 and IPX4 water ingress protection test?

1. Spray nozzle 1.  Introduction The spray nozzle hand-held device is designed according to IEC60529 figure 5, it is it is apply to verify the protection against spraying water (IPX3) and splashing water (IPX4) for large size sample. The hand-held device is consisted by spray nozzle, moving shield, counterweight, hose and pressure gauge. The spray nozzle is made of brass and has 121 holes with diameter 0.5mm (1 hole at center, 1 inner circles of 12 holes at 30 0  pitch, 4 outer circles of 24 holes at 15 0 pitch). The moving shield is made of aluminum, the counterbalanced shield is in place for IPX3 test, the water pressure is adjusted to give the specified delivery rate, the pressure to achieve this delivery rate will be in the range of 50kPa to 150kPa, and it should be kept constant during the test, the test duration is 1min/m 2  of the calculated surface of the enclosure and with a minimum duration of 5 min. For IPX4 test, the counterbalanced shield is removed fro...
发表评论
阅读全文