跳至主要内容

Multiplex Temperature Tester

https://www.pegotester.com/multiplex_temperature_meter.html#nSL=%5B5%2C6%2C7%2C8%5D&skeyword=multiplex&_pp=0_35

Multiplex Temperature Tester 

 1. Introduction

Multiplex temperature tester is a equipment that can simultaneously monitor multiple channel temperatures. Equip with 5-inch LCD touch screen, the upper and lower limit can be preset for alarming, display and record the temperature of each channel at real time, the column graph and temperature change graph can visually show the temperature change of each channel.

 

2. Specification

Model

TCP-8X

TCP-16X

TCP-24X

TCP-32X

TCP-40X

TCP-48X

TXP-56X

TCP-64X

Test channel

8

16

24

32

40

48

56

64

Touch screen

5-inch, LCD

Display accuracy

0.2℃±2 digit

Temperature sensor

K type (3m length for each channel)

Temperature test range

-50℃~1300℃

Alarming function

Upper and lower limit can be preset for alarming, and support on real time record

Column graph

The real-time temperature is displayed in the form of a bar graph, and the temperature value of each channel can be compared more clearly and intuitively.

temperature change graph

The real-time temperature can be tracked as a changing graph, and support on settings for X and Y axis values automatically or manually

Temperature units

K, 0F, 0C

Operation language

Chinese-English switchable

Performance

32-digit ARM micro-processor, response time less than 0.5s

Anti-interface

Each channel is isolated from each other, anti-high frequency interference, the peak value of isolation voltage can reach 2500V

Storage capacity

8G

Data protection

the data can be stored for 72 hours to 180 days, and will not lose when emergency shut down

U disk

Support U disk to export the storage data

Temperature compensation

each channel supports temperature compensation and provides multiple compensation modes

Mark function

Each channel can be named arbitrarily

Sampling interval

100ms (H), 500ms (Middle), 1s (Low)

Interface

USB 2.0

Working power

AC85V-265V, 50Hz/60Hz

Dimension

215mm*300mm*100mm (L*W*H)

  




标签：

评论

发表评论

此博客中的热门博文

The material of standardized cookware in EN60350-2 version 2018 and version 2013

The standardized cookwares referred in this article are designed according to EN(IEC)60350-2 table (Z)3. The diameter of the cookware bottom (outside), diameter of the lid, lid hole circle diameter, number of holes on the circle, total cookware height (outside) and flatness of cookware bottom are specified in table (Z)3. The materials of side wall, cookware bottom and lid are different. In version 2018, the side wall of cookware is made of stainless steel AISI type 304, the cookware bottom is made of stainless steel AISI type 430, and and the lid is made of aluminium. In version 2013, the side wall of cookware is made of 1.4301 stainless steel, the cookware bottom is made of stainless steel 1.4016, and the lid is made of aluminium. Items Version 2018 Version 2013 Remark material thickness material thickness Side wall   stainless steel AISI  304 1mm±0.05mm 1.4301 stainless steel 1mm±0.05mm C ylindrical without handles or protrusions. Cookware bottom stainless steel AISI  ...
发表评论
阅读全文

vertical impact hammers

The vertical impact hammer is designed according to IEC60068-2-75 test Ehc, the hammer consists by a striking element which falls freely from rest through a vertical height on to the specimen surface held in a horizontal plane, and the fall of the striking element shall be along a guideway, the guideway shall not rest on the specimen and the striking element shall be free of the guideway on the striking the specimen , the mass of striking element is equal to equivalent mass . 2J striking element equip with Φ 40 mm*4 71 mm guideway, 5J striking element equip with Φ6 8 mm*3 85 mm guideway, 10J striking element equip with Φ8 9 mm* 337 mm guideway, 20J striking element equip with Φ10 8 mm* 520 mm guideway, 50J striking element equip with  Φ12 9 mm* 650 mm guideway. 
发表评论
阅读全文

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5   1.  Introduction: The high current arc ignition tes t apparatus is designed according to  IEC60950-1:2001  clause 4.7.3.6 , BS/EN60950-1:2001, BS7002:2001, GB4943-2001 and UL746A, IEC60947.1:1999, GB/T14048.1-2000, IEC730.1:1993, GB14536.1-1998 and etc..  It ’ s used to measure and assess  solid insulating material against to resistance to ignition from arcing electrical sources. A power 240V(AC)/60Hz is to be supplied to the test electrodes  (fixed electrode and movable electrode) , a series (inductive-resistive) air core impedance is to be provided to yield a short circuit current of 32.5A and a power factor of 0. 5. The sample is be to positioned with the electrodes making initial contact on the surface of the sample, the circuit is to be energized and the cyclic arcing started. The timing of arcs is to be adjusted to a rate of 40 arcs/min, the rate of electrode separation is to be 254±...
发表评论
阅读全文