跳至主要内容

博文

目前显示的是 七月, 2022的博文

GB/T 1002-2021 Single Phase 2-Pole Plug and Socket-Outlet Test Gauges

  GB100 2 Single-Phase  Plug and Socket-Outlet Gauges 1.  Introduction The single phase plug and socket-outlet test Gauges are designed according to GB1002-2021 figures 8/9/10/11/12/13/14/15/16. They are applicable to verify the single phase plugs and fixed or mobile socket-outlets for household with an AC frequency of 50 Hz, rated voltage of 250 V, rated current not exceeding 16A. Standard/figure number Gauge name Qty Test Purpose GB/T 1002-2021, Figure 8 Single Phase Two-Pole Plug Gauge (≤10A) 1 The pins of the plug shall be able to pass the gauges shown in Figures 8 and 9. If the plug pin is provided with an insulating sheath, the insulating sheath part does not need to pass the gauge in Figure 8 and Figure 9. The plugs can smoothly plug-in and pull out in vertical and horizontal directions with a small force shows qualified, Otherwise, the distance between the pins or the inclination and position of the pins do not match. Note: The insertion force ...

GB/T1003-2016 3-Phases 5-Wires Plug and Socket-Outlet Test Gauges

GB1003 3-Phases Plug and Socket-Outlet Gauges 1.  Introduction The 3-phase plug and socket-outlet test Gauges are designed according to GB1003-2016 figure 5, figure 6, figure 7, figure 8 and figure 9. They are applicable to verify the three-phase plugs and three-phase fixed or mobile socket-outlets for household with an AC frequency of 50 Hz, rated voltage of 440 V, rated current not exceeding 32 A.   2.  Parameter No. Standard/figure number Gauge name Qty Test Purpose 1 GB/T1003-2016, figure 5 3-Phases 5-Wires Plug Gauges (16A, 25A, 32A) 3 The plug should be able to insert into the gauge   Note: The insertion force should not be greater than the maximum withdrawal force specified in GB/T2099.1. 2 GB/T1003-2016, figure 6 3-Phases 5-Wires Socket-Outlet Go Gauges (16A, 25A, 32A) 3 The go gauge shall be able to insert into the jacks of the 3-phases and 5 wires socket-outlets. For 3-phases 4-wires socket-outlet, the go gauge that removes the neutral pole shown figure 6 i...