跳至主要内容

Significance of Strong Water Spray Test

The strong jet water testing equipment is a device used to test the ability of enclosure to withstand high-intensity water jets. The equipment is usually integrated with high pressure water pump, flowmeter, booster pump and etc. to generate high-intensity water flow, and jet the device under test at a distance of 2.5m to 3m. The main test purpose includes:

1. Verify the waterproof performance of the product: the strong jet water testing equipment can simulate the protection ability of the product in the environment of rain, flood and etc., so as to verify whether the product meets the corresponding waterproof level standard (IPX5, IPX6). Through the tests, the waterproof performance of the product can be checked to evaluate whether it can withstand the water jets and powerful water jets.  

2. Verify the sealing performance of the product: The strong jet water testing equipment can apply specified water pressure and flow to test the sealing performance of the device under test. The test can check if the product has the problems of air leakage and water leakage, and if the enclosure is sufficiently airtight to keep the interior of the product dry and hygienic.

3. Verify the water resistance of the product: the strong jet water testing equipment can simulate the environment where the product is soaked in water to evaluate the water resistance of the product. Through the tests, it can verify if the product can keep its original function and performance after long-term water immersion.

4. Verify the safety performance of the product: the strong jet water testing equipment can test the product’s safety performance to ensure that it will not cause harm to the human body and the surrounding environment when subjected to high-intensity water jets. This test can verify the safety performance and protection ability of the device under test, and assess its ability to meet relevant safety standards.

 

To sum up, the strong jet water testing equipment is mainly used to test the waterproof performance, sealing performance, water resistance and safety of the product, so as to evaluate whether it can adapt to various environments and application requirements.

 

标签：

评论

发表评论

此博客中的热门博文

JIS D0203 rain nozzle and spray nozzle test chamber

https://www.pegotester.com/JISD0203_rain_and_spray_test_chamber.html The spray nozzle and rain nozzle test chamber is designed to meet the test requirements of JISD0203 R1/R2 rain test and S1/S2 spray test. The rain nozzle has 2 holes and spray nozzle has 40 holes. Type Symbol Test Purpose Test Method Rain Test R1 Auto parts against water direct contact water pressure: 0.01Mpa, water flow: 1.9L/min, water temperature: ordinary temperature, test time: 10min R2 Auto parts against rain or spray water   indirect contact water pressure: 0.03Mpa, water flow: 3.2L/min, water temperature: ordinary temperature, test time: 10min Spray Test S1 Auto parts against rain or jet water direct contact water pressure: 0.10Mpa, water flow: 24.5L/min, water temperature: ordinary temperature, test time: 30min S2 Auto parts against riptide water pressure: 0.30Mpa, water flow: 39.2L/min, water temperature: ordinary temperature, test time: 1h  
发表评论
阅读全文

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5   1.  Introduction: The high current arc ignition tes t apparatus is designed according to  IEC60950-1:2001  clause 4.7.3.6 , BS/EN60950-1:2001, BS7002:2001, GB4943-2001 and UL746A, IEC60947.1:1999, GB/T14048.1-2000, IEC730.1:1993, GB14536.1-1998 and etc..  It ’ s used to measure and assess  solid insulating material against to resistance to ignition from arcing electrical sources. A power 240V(AC)/60Hz is to be supplied to the test electrodes  (fixed electrode and movable electrode) , a series (inductive-resistive) air core impedance is to be provided to yield a short circuit current of 32.5A and a power factor of 0. 5. The sample is be to positioned with the electrodes making initial contact on the surface of the sample, the circuit is to be energized and the cyclic arcing started. The timing of arcs is to be adjusted to a rate of 40 arcs/min, the rate of electrode separation is to be 254±...
发表评论
阅读全文

what equipment can be used for IPX3 and IPX4 water ingress protection test?

1. Spray nozzle 1.  Introduction The spray nozzle hand-held device is designed according to IEC60529 figure 5, it is it is apply to verify the protection against spraying water (IPX3) and splashing water (IPX4) for large size sample. The hand-held device is consisted by spray nozzle, moving shield, counterweight, hose and pressure gauge. The spray nozzle is made of brass and has 121 holes with diameter 0.5mm (1 hole at center, 1 inner circles of 12 holes at 30 0  pitch, 4 outer circles of 24 holes at 15 0 pitch). The moving shield is made of aluminum, the counterbalanced shield is in place for IPX3 test, the water pressure is adjusted to give the specified delivery rate, the pressure to achieve this delivery rate will be in the range of 50kPa to 150kPa, and it should be kept constant during the test, the test duration is 1min/m 2  of the calculated surface of the enclosure and with a minimum duration of 5 min. For IPX4 test, the counterbalanced shield is removed fro...
发表评论
阅读全文