跳至主要内容

IPX9K High Pressure and High Temperature Test Chamber


1. Introduction
IPX9K High temperature and high pressure jet spray test chamber is designed according to IEC60529, DIN40050-9 figure 7 and ISO20653 figure 8 and 9. IPX9K fan jet and jet distribution for test device to verify protection against high pressure/steam jet cleaning. It is applied to electrical equipment in road vehicles, motors, electric components and auto parts to do the waterproof test. After the test, the user can judge if the performance of the product can meet the requirements or not, and then do the re-designing and improvement.

IPX9K High Pressure/Steam Water Jets Cleaning
Water projected in high pressure high temperature against the enclosure from 4 directions (00, 300, 600, 900) shall have no harmful effects. Test duration: 30s per direction, water volume: 14~16 litres per minute, pressure: 8000~10000 Kpa, temperature: 80±5℃, test distance: 100 to 150mm 

2. Features
1). high-quality steel plate, coating with stoving varnish.
2). The chamber inner and support are made by SUS304# stainless steel.
3). Adopts 7 inch touch screen and PLC core control component, easy to operation and auto control.
4). Adopts high quality stepping motor, set the speed and angle by touch screen.
5). IPD temperature control, set the temperature by touch screen.
6). Test time: 0-999min adjustment, auto stop.
7). Communication function optional, can work with PC to save the data.
8). With leakage protection, water shortage protection, overflow protection and short circuit protection to protect the equipment from damage . Door induction proection to protect the operator from hurt.
9). Built-in water tank, the water can be recycled. With ball valve to control the water level, and has low water leve alarm function
10). With a transparent observation window made by tempered glass, an LED light is installed in the box to facilitate observation during the test.

3. Specification: 
Model
IPX9K
Inner size
L1200*D1200*H1200mm (depends on the specimen)
External size
L1600*D1380*H2150mm
Test time
30S for each position
Jet angle
0°30°60°90°
Numbers of jet
4
Diameter of turntable
400mm
Lifting mode of turntable
Manual adjustable (adjust height: 410~680mm)
Spray distance
100-200mm (manual control)
Water pressure
8000-10000Kpa
Water flow
14～16L / min
Water tank
50L (recyclable)
Temperature
250C (room temperature), 80±5℃
Test time
120s (30s/position)
Rotational Speed
4～10r/min(adjustable)
Bear weight
50kg
Protection device
Leakage, water break, short circuit
Working Power(V)
380V/50Hz
Sample Power (V)
220V
Power(KW)
10
Operation Language
English/Chinese Switchable
标签：

评论

发表评论

此博客中的热门博文

The material of standardized cookware in EN60350-2 version 2018 and version 2013

The standardized cookwares referred in this article are designed according to EN(IEC)60350-2 table (Z)3. The diameter of the cookware bottom (outside), diameter of the lid, lid hole circle diameter, number of holes on the circle, total cookware height (outside) and flatness of cookware bottom are specified in table (Z)3. The materials of side wall, cookware bottom and lid are different. In version 2018, the side wall of cookware is made of stainless steel AISI type 304, the cookware bottom is made of stainless steel AISI type 430, and and the lid is made of aluminium. In version 2013, the side wall of cookware is made of 1.4301 stainless steel, the cookware bottom is made of stainless steel 1.4016, and the lid is made of aluminium. Items Version 2018 Version 2013 Remark material thickness material thickness Side wall   stainless steel AISI  304 1mm±0.05mm 1.4301 stainless steel 1mm±0.05mm C ylindrical without handles or protrusions. Cookware bottom stainless steel AISI  ...
发表评论
阅读全文

vertical impact hammers

The vertical impact hammer is designed according to IEC60068-2-75 test Ehc, the hammer consists by a striking element which falls freely from rest through a vertical height on to the specimen surface held in a horizontal plane, and the fall of the striking element shall be along a guideway, the guideway shall not rest on the specimen and the striking element shall be free of the guideway on the striking the specimen , the mass of striking element is equal to equivalent mass . 2J striking element equip with Φ 40 mm*4 71 mm guideway, 5J striking element equip with Φ6 8 mm*3 85 mm guideway, 10J striking element equip with Φ8 9 mm* 337 mm guideway, 20J striking element equip with Φ10 8 mm* 520 mm guideway, 50J striking element equip with  Φ12 9 mm* 650 mm guideway. 
发表评论
阅读全文

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5

UL746A High Current ARC Ignition Test Apparatus 32.5A/COSφ0.5   1.  Introduction: The high current arc ignition tes t apparatus is designed according to  IEC60950-1:2001  clause 4.7.3.6 , BS/EN60950-1:2001, BS7002:2001, GB4943-2001 and UL746A, IEC60947.1:1999, GB/T14048.1-2000, IEC730.1:1993, GB14536.1-1998 and etc..  It ’ s used to measure and assess  solid insulating material against to resistance to ignition from arcing electrical sources. A power 240V(AC)/60Hz is to be supplied to the test electrodes  (fixed electrode and movable electrode) , a series (inductive-resistive) air core impedance is to be provided to yield a short circuit current of 32.5A and a power factor of 0. 5. The sample is be to positioned with the electrodes making initial contact on the surface of the sample, the circuit is to be energized and the cyclic arcing started. The timing of arcs is to be adjusted to a rate of 40 arcs/min, the rate of electrode separation is to be 254±...
发表评论
阅读全文